Congratulations to Danielle Bilder!
Thanks to everyone who played, and for all of your generous comments!
Saturday, March 18, 2017
While I love a beautiful padstitched lapel, sometimes the circumstances call for other methods. With some fabrics, it's really hard to hide a stitch... for example, I'm currently working on a trench coat with a smooth cotton twill that would be difficult to padstich, but I still want beautifully curved collar and lapel. Or, perhaps I just want to move forward on a project, rather than spending hours with a needle and thread.
The method shown here is from Anna Zapp's book, "The Zapp Method of Couture Sewing," with modifications from my own experience.
Cut the lapel piece from heavy-medium weight fusible interfacing, ON THE BIAS. I used fusible horse hair canvas from Fashion Sewing Supply. Cut the body piece from medium weight fusible interfacing. Depending on how much structure you want in your jacket, this could be more horse hair canvas, or a lighter more flexible interfacing, such as weft interfacing.
Fuse the front body interfacing piece to the as you normally would, following the manufacturer's instructions for applying the interfacing.
For the lapel piece, start fusing at the roll line. The lapel piece should be a total of a 1/2 inch shorter at the roll line, so stretch it to fit the roll line of the body interfacing piece. Since it is cut on the bias, it should stretch to fit.
Fuse the roll line of the lapel piece into place wile holding it in its stretched position.
The interfacing should naturally want to curl. Continue fusing your lapel around a curved surface. Here I'm using the edge of my ironing board, with extra padding (which happens to be an old wool sweater).
Then apply twill tape at the roll line, if desired. Twill tape is usually cut 1/4 inch shorter than the roll line. This can be machine stitched, but I usually hand stitch it.
Use steam to finish shaping the lapels.
For the under collar, a similar technique can be used. Use the under-collar pattern piece to cut your under collar interfacing from horse hair canvas, on the bias. Trim the seam allowances. Further trim the edges by about 1/4 where you want the collar to turn.
Stretch the interfacing along the approximate roll line, and fuse into place. Use the edge of your board or a sleeve roll so that the iron contacts the interfacing just on this line.
Continue to fuse the interfacing around a curved surface. When you are done, the collar should hold its curve by itself. Apply your collar-stand interfacing, if you are using this piece.
Finish shaping the under collar by curling it around your ham and pinning it in place. Apply liberal amounts of steam to perfect the shape.
And your collar and lapels are done, ready to be sewn into your coat!
These lapels were from my asymmetric zip coat. I'm currently working on a trench coat, and I think I'll be using fusible tailoring again, since I'm not fond of the idea of pad-stitching on a smooth twill.
Have you tried tailoring with fusibles? Please share your experiences and tips in the comments!
Monday, March 13, 2017
I know it's been a long time-- I have so many posts to write, and so little time! I'm hoping that life will calm down a little so that I can share more with you in the near future. Today I have an extra-special post with an exciting giveaway at the end!
I'm currently really enjoying the Blackwood Cardigan by Helen's Closet. To be truthful, I've been waiting for the right cardigan pattern to come along. I have a trusty cardigan pattern that I pull out when I need a new one, but it is basically a poor attempt tracing a favorite cardigan, and the fit has always been just a bit sloppy and I've been too lazy to fix it.
I was a pattern tester for the Blackwood. When Helen revealed that her new pattern was a cardigan, I was thrilled-- it's just what I was looking for!
I also have a few other favorites from Indie designers that fit certain needs. The Coppelia Cardigan by Papercut Patterns is a cozy wrap design (I've blogged that here and I have another one that I love even more in a simple merino knit that I apparently never blogged). For a classic button front cardigan there is the Lisbon Cardigan by Itch to Stitch (see mine here).
What's nice about the Blackwood is that it is a simple, no closure design. It is designed to fit closely, and has cuffs, a neck band and a bottom band, so you can sew the entire thing on a serger. This is the line drawing from the pattern, so you can see it is a pretty straightforward design, with a long and a short view.
My first version is View B, unaltered except to shorten the sleeves by one inch. It's a little longer on me than in the drawings, probably because I'm 5'4", but I like the extra length. I made this one in a stretchy wool knit. I can't recall the exact composition of this fabric, but it definitely has some spandex in it.
I just love the super-wide bottom band on this cardigan, it feels so decadent to make a band so wide, and it also gives the bottom of the cardigan a bit more weight and substance which improves the drape.
I interfaced the bands with a lightweight knit interfacing, just to give them a touch of structure and to encourage my very stretchy knit to behave properly. I also put a strip of interfacing in the shoulder seam to prevent stretching.
I followed the directions as written on this version, and everything worked out beautifully. I did have a bit of fun with this all black cardigan by binding the seams with a fun black and white lace print knit. I did all of the construction on the serger, except for the seam binding.
To show off this lovely ribbing, and to maximize coziness, I made the neck band the same width as the bottom band. This simple change also really makes this cardigan look totally different from my first black cardigan.
Attaching neck bands to cardigans is always a bit of a dilemma for me. I just hate to have that seam exposed, it looks so unprofessional to me. So on this cardigan, I decided to fold under the raw edge and top stitch it down. This is sort of hard to do neatly since you need to top stitch from the front side and catch that folded edge on the underside. I've tried various methods to keep that back side in line, including using tons of pins and wash away tape. This time I tried hand basting.
The end result isn't perfect, but I still prefer it to a serged edge.
So, my next version I decided I needed to break up my black streak. I've had this lovely Missoni knit in my stash from Emmaonesock for awhile. It is really quite lovely, mostly viscose with a bit of brassy sparkle, in a bold color scheme from the height of Missoni's chevron craze. I was thinking I'd make it into a dress, but I think it will get much more wear as a cardigan.
In a flash of inspiration, I remembered that I had some black silk jersey scraps from a previous project. Instead of cutting the neck band and wrist bands in a single piece and folding, I cut the pattern piece into two pieces and added a seam allowance to each piece. This allowed me to use the silk jersey on the inside of the bands, and the wool boucle on the outside. The two are perfect together... the wool provides structure and a beautiful color and texture, while the silk jersey reduced bulk and is wonderfully soft on the neck and wrists.
I went up a size for this cardigan, from a large to an XL. The Missoni knit is considerably thicker than the fabrics this pattern calls for, and while it is a loose knit, it doesn't have the kind of stretch and recovery that a knit with spandex has. I kept the shoulder width of the L though, since I thought this was perfect on me, and I didn't want the drop-shoulder look.
However, I think there was also a bit of lateral growth when I was working with the pattern pieces, and I might have overcompensated, since it is a bit roomier than I expected. I may take it in a bit at some point, especially if it continues to stretch out, but a bit of extra room in a cardigan isn't such a bad thing.
Since this is a very loose knit, I fused strips of bias-cut weft interfacing in the shoulder seams and the armhole seams to prevent the sweater from stretching out of shape over time.
For finishing the bottom band and neck bands, I hand sewed the back of the band to the sweater. Hand sewing isn't my favorite thing, but I wanted a truly lovely finish on these somewhat fickle materials so I conceded gracefully.
While it's not perfect, it is a fun piece to wear and it is both practical and luxurious. In my mostly dark-colored wardrobe, I enjoy having a few quirky garments that I pull out a couple times each season, and this definitely fills that role.
There you have it, one pattern resulting in three very different cardigans. The possibilities are endless... and I haven't even cracked open view A!
Dear readers... how will you personalize your Blackwood? With special thanks to Helen, enter the Rafflecopter giveaway for the chance to win your very own PDF copy of the Blackwood Cardigan Pattern. The giveaway will be open until Sunday March 19th at 12am, and I'll contact the winner by email.
a Rafflecopter giveaway